Regal Sales Corporation, Mumbai
Mumbai, Maharashtra
GST No. 27AAFFR4347E1Z8
Call 08048079047 85% Response Rate
Send E-mail
We have emerged as a renowned manufacturer by providing wide range of Industrial Flanges like Slip on Flanges (SORF), Weld Neck Flanges (WNRF), Socket Weld Flanges (SWRF), Blind Flanges (BLRF), Lap Joint Flanges, Screwed Flanges and Reducing Flanges. These flanges are fabricated using quality tested stainless steel to ensure durability. Available in varied specification, our stainless steel flanges range is appreciated for high strength, corrosion resistance and dimensional accuracy.
We are a leading Exporter and we are mainly looking for overseas queries.
| Material Standard | ASTM A105, ANSI B16.5, ASTM A182 |
| Size | 1-5 inch, 0-1 inch |
| Rated Pressure (Bar) | 1.6 MPA |
| Brand | ALL |
We are a leading manufacturer and exporter of a wide range of ANSI B 16.5 Class 300 - Threaded Flanges, which has dimensions that corresponds to the inside diameter of the pipe and has a standard wall thickness of 40S. The weights of these flanges are based as per the clients’ requirements.
Stainless Steel : ASTM A 182, A 240
Grade : F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L,
Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750
Carbon Steel : ASTM A 105, ASTM A 181
Alloy Steel : ASTM A 182, GR F1, F11, F22, F5, F9, F91
Nickel Alloys : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276
Copper Alloys : Copper, Brass & Gunmetal
Size : 1/8" NB TO 48"NB.
Class : 150#, 300#,400 #,600#,900#, 1500# & 2500 #.
| Size | 1-5 inch, 0-1 inch |
| Material Standard | ASTM A105, ASTM A351, ASTM A182 |
| Rated Pressure (Bar) | 1.6 |
| Brand | ALL |
*Your information is safe with us.
| Size | 1-5 inch, 0-1 inch |
| Material Standard | ANSI B16.5, ASTM A182, ASTM A351, ASTM A105 |
| Rated Pressure (Bar) | 1.6 MPA |
| Brand | ALL |
Our range of Screwed Flanges is available in various forms like supply stainless steel, carbon steel and nickel alloy flanges. These stainless steel screwed flanges are manufactured using casing and forging method. We also offered screwed flanges as per the specification and drawing of clients.
Features: Screwed Flanges
High Strength
Dimensional Accuracy
Thermal Resistance
Corrosion Resistance
Chemical Resistance
Durability
Fine Finish
Specification:
Steel: ASTM A 182, A 240
Grade: F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347,
347H, 904L
Duplex Stainless Steel UNS S31803, 2205,
Super Duplex Stainless Steel UNS S32750
Carbon Steel: ASTM A 105, ASTM A 181
Alloy Steel: ASTM A 182, GR F1, F11, F22, F5, F9, F91
Nickel Alloys: Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276
Copper Alloys: Copper, Brass & Gunmetal
Size: 1/8" NB to 48"NB.
Class: 150, 300, 400, 600, 900, 1500 & 2500
| Size | 1-5 inch, 0-1 inch |
| Rated Pressure (Bar) | 1.6 MPA |
| Brand | ALL |
| Material Standard | ASTM A182, ASTM A105, ASTM A351 |
We provide Weld Neck Flanges (WNRF) that are designed in conformation with international quality standards. This flange has a heavy welding neck, which is hot formed from a circular section of steel plate having a small co-axial hole in the center. We offer customization on our stainless steel weld neck flanges range as per the requirement of clients.
Features: Weld Neck Flanges
Thermal Resistance
Dimensional Accuracy
Durability
Optimum Strength
Corrosion Resistance
Chemical Resistance
Fine Finish
Specification:
Stainless Steel: ASTM A 182, A 240
Grade: F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L
Duplex Stainless Steel UNS S31803, 2205,
Super Duplex Stainless Steel UNS S32750
Carbon Steel: ASTM A 105, ASTM A 181
Alloy Steel: ASTM A 182, GR F1, F11, F22, F5, F9, F91
Nickel Alloys: Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276
Copper Alloys: Copper, Brass & Gunmetal
Size : 1/8" NB to 48"NB
Class: 150, 300, 400, 600, 900, 1500 & 2500
| Size | 0-1 inch, 1-5 inch |
| Material Standard | ASTM A105, ANSI B16.5 |
| Rated Pressure (Bar) | 1.6 |
| Brand | ALL |
We supply Lap Joint Flanges that are ideal for those systems, which require dismantling for inspection and cleaning. Our range of stainless steel lap-joint flanges is used in those piping that are fitted with the lapped pipe or with the lap joint stub ends. The lap joint flange is more or less similar to slipon flange with only difference i.e. they have curved radius at the bore and face to accommodate a lap joint stub end. In addition swivel flanges and align bolt holes have the ability in easing the erection of large diameter. Our stainless steel Lap Joint Flanges range is offered in full size and widely used at all pressures.
Features:
Chemical Resistance
Durability
Dimensional Accuracy
High Strength
Corrosion Resistance
Thermal Resistance
Excellent Finish
*Your information is safe with us.
| Size | 1-5 inch, 0-1 inch |
| Material Standard | ASTM A105, ANSI B16.5, ASTM A182 |
| Rated Pressure (Bar) | 1.6 |
| Brand | ALL |
We offer Slip on Flanges (SORF), which are available in several grades and specifications. The slip-on flange is a solid, circular type of pipe flange, which is slipped over the end of a pipe and welded in. Our range is fabricated using quality tested raw material to ensure long service life.
Features:
Chemical Resistance
High Strength
Dimensional Accuracy
Corrosion Resistance
Thermal Resistance
Durability
Excellent Finish
Specification:
Stainless Steel: ASTM A 182, A 240
Grade: F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L
Carbon Steel: ASTM A 105, ASTM A 181
Alloy Steel: ASTM A 182, GR F1, F11, F22, F5, F9, F91
Nickel Alloys: Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276
Copper Alloys: Copper, Brass & Gunmetal
Size: 1/8" NB to 48"NB
Class: 150, 300, 400, 600, 900, 1500 & 2500
| Size | 5-10 inch, 1-5 inch, 0-1 inch |
| Rated Pressure (Bar) | 1.6 |
| Brand | ALL |
| Material Standard | ASTM A105, ANSI B16.5, ASTM A182 |
We export Blind Flanges (BLRF), which are mainly used to close the end of pipes, valves, pressure vessel openings and other channels where one end needs to be blanked off. These are designed in conformation with international quality to meet the requirement of varied industry applications. Our range can be customized as the specification of client.
Features:
Dimensional Accuracy
High Strength
Thermal Resistance
Durability
Chemical Resistance
Corrosion Resistance
Fine Finish
Specification:
Stainless Steel: ASTM A 182, A 240
Grade: F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L,
Duplex Stainless Steel UNS S31803, 2205,
Super Duplex Stainless Steel UNS S32750
Carbon Steel: ASTM A 105, ASTM A 181
Alloy Steel: ASTM A 182, GR F1, F11, F22, F5, F9, F91
Nickel Alloys: Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276
Copper Alloys: Copper, Brass & Gunmetal
Size: 1/8" NB to 48"NB
Class: 150, 300, 400, 600, 900, 1500 & 2500
| Thread Size | 1 MM |
| Size | 1/2 inch, 2 inch, 3/4 inch, 1 inch |
| Application | Chemical Fertilizer Pipe, Structure Pipe |
| Brand | All |
Our range of Socket Weld Flanges (SWRF) is fabricated using quality stainless steel, carbon steel to ensure durability and optimum performance. Available in different sizes and shapes, these flanges meet requirement varied industry applications. Socket weld flange is a kind of device, which is welded to the end of pipe so that the pipe can be bolted to another pipe with a similar flange.
Features:
High Strength
Corrosion Resistance
Thermal Resistance
Durability
Chemical Resistance
Dimensional Accuracy
Excellent Finish
Specification:
Stainless Steel: ASTM A 182, A 240
Grade: F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347,
347H, 904L
Duplex stainless steel UNS S31803, 2205,
Super Duplex stainless steel UNS S32750
Carbon Steel: ASTM A 105, ASTM A 181
Alloy Steel: ASTM A 182, GR F1, F11, F22, F5, F9, F91
Nickel Alloys: Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276
Copper Alloys: Copper, Brass & Gunmetal
Size: 1/8" NB to 48"NB.
Class: 150, 300, 400, 600, 900, 1500 and 2500
*Your information is safe with us.
| Size | 0-1 inch, 1-5 inch |
| Rated Pressure (Bar) | 1.6 MPA |
| Material Standard | ASTM A105, ASTM A182, ASTM A351, ANSI B16.5 |
| Brand | ALL |
| Size | 0-1 inch, 1-5 inch |
| Rated Pressure (Bar) | 1.6 |
| Material Standard | ASTM A105, ASTM A182, ANSI B16.5 |
| Brand | ALL |
We Regal Sales Corporation are the largest Manufacturer and exporter of industrial suppliers. We offer our clients an assortment of INCONEL Reducing Flanges that are widely used in many industries.
Range: 1/2” NB to 60” NB
Class : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS DIN Standard ND 6,10, 16, 25, 40
Grade: UNS N06600, N06601, N06625, N08800, N08810, N08825
| Size | 0-1 inch |
| Rated Pressure (Bar) | 1.6 |
| Material Standard | ASTM A105, ASTM A182, ANSI B16.5 |
| Brand | All |
We are manufacturers of hastelloy/titanium/inconel flange.
| Our Hastealloy Flanges are available in varied material and pressure range, different types of driving manners like handle driving, worm wheel and screw driving, air-operating and fluid driving, and electric driving. Types:-Slip on, socket weld, blind, lapped, screwed, weld neck, reducing, spectacle, slip on boss, plate, plate blank, screwed boss as per the following grades:- Standard ASTM / ASME SB 564 Grades Hastelloy C-4 (UNS No. N06455), C-276 (UNS No. N10276), Hastelloy C 22 (UNS No. N06022), Hastelloy C 2000 |
*Your information is safe with us.
| Size | 1-5 inch, 0-1 inch |
| Material Standard | ASTM A351, ASTM A105, ANSI B16.5, ASTM A182 |
| Rated Pressure (Bar) | 1.6 |
| Brand | ALL |
| SORF Flange 1.Name: SO Flange Slip-On Flanges: |
| Size | 0-1 inch |
| Material Standard | ASTM A105 |
| Rated Pressure (Bar) | 1.6 MPA |
| Brand | ALL |
| Size | 1-5 inch, 0-1 inch |
| Rated Pressure (Bar) | 1.6 |
| Brand | ALL |
| Material Standard | ANSI B16.5, ASTM A182, ASTM A105 |
*Your information is safe with us.
| Size | 1-5 inch, 0-1 inch |
| Rated Pressure (Bar) | 1.6 |
| Brand | ALL |
| Material Standard | ASTM A105 |
We offer a complete range of ANSI B 16.5 Class 150 - Blind Flanges, that are precision engineered using best quality raw material. These ANSI blind flanges find application in numerous industries such as engineering, automotive, oil & gas etc. Our range is in compliance with set industrial standards and known for accurate size and durability. Further, these blind flanges (ANSI) are available in different specifications to suit the varied requirements of our clients.
| Material Standard | ASTM A105, ANSI B16.5, ASTM A351, ASTM A182 |
| Size | 1-5 inch, 0-1 inch |
| Rated Pressure (Bar) | 1.6 |
| Brand | ALL |
| Material Standard | ASTM A105 |
| Size | 0-1 inch |
| Rated Pressure (Bar) | 7 |
| Brand | JINDAL |
*Your information is safe with us.
| Size | 1-5 inch, 0-1 inch |
| Material Standard | ASTM A105 |
| Rated Pressure (Bar) | 1..6 mpa |
| Brand | All |
| Size | 1-5 inch, 0-1 inch |
| Rated Pressure (Bar) | 1.6 |
| Material Standard | ASTM A105, ASTM A182, ASTM A351, ANSI B16.5 |
| Brand | All |
| Size | 5-10 inch, 0-1 inch, 1-5 inch |
| Material Standard | ASTM A105, ANSI B16.5, ASTM A182, ASTM A351 |
| Rated Pressure (Bar) | 1.5 |
| Brand | All |
*Your information is safe with us.
| Size | 1-5 inch, 0-1 inch |
| Material Standard | ASTM A105, ANSI B16.5, ASTM A182, ASTM A351 |
| Rated Pressure (Bar) | 1.5MPA |
| Brand | ALL |
The wide range of ANSI B 150 Class- Threaded Flanges offered by us is in conformation with international quality standards. These are designed as per the standards set by various national and international authorities and are manufactured using high grade steel. Our range of flanges is highly acknowledged in the domestic and global markets, due to features such as application specific design and corrosion resistance.
Stainless Steel : ASTM A 182, A 240
Grade : F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L,
Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750
Carbon Steel : ASTM A 105, ASTM A 181
Alloy Steel : ASTM A 182, GR F1, F11, F22, F5, F9, F91
Nickel Alloys : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276
Copper Alloys : Copper, Brass & Gunmetal
Size : 1/8" NB TO 48"NB.
Class : 150#, 300#,400 #,600#,900#, 1500# & 2500 #.
| Size | 0-1 inch |
| Material Standard | ASTM A105 |
| Rated Pressure (Bar) | 7 |
| Brand | JINDAL |
We have with us a range of ANSI B 16.5 Class 600 - Threaded Flanges that are manufactured using high grade steel. These flanges are suitable to be used in low pressure services at ambient temperature. Designed using advanced technology, our range is widely appreciated for dimensional accuracy, corrosion resistance and high durability. Further, we also make sure that these flanges meet the international quality standards.
| Size | 1-5 inch, 0-1 inch |
| Material Standard | ASTM A105, ANSI B16.5 |
| Rated Pressure (Bar) | 1.5 |
| Brand | ALL |
*Your information is safe with us.
| Size | 1-5 inch, 0-1 inch |
| Material Standard | ASTM A105, ANSI B16.5 |
| Rated Pressure (Bar) | 1.6 |
| Brand | ALL |
Another range of threaded flanges offered by us is ANSI B 2500 Class- Threaded Flanges. These conform to ASME B1. 20.1 NTP threads, the only exceptions are small male and female plain face threaded flanges which use NPSL locknut threads. The flanges offered by us are offered in numerous specifications and can be further customized as per the requirements of our clients.
Stainless Steel : ASTM A 182, A 240
Grade : F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L,
Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750
Carbon Steel : ASTM A 105, ASTM A 181
Alloy Steel : ASTM A 182, GR F1, F11, F22, F5, F9, F91
Nickel Alloys : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276
Copper Alloys : Copper, Brass & Gunmetal
Size : 1/8" NB TO 48"NB.
Class : 150#, 300#,400 #,600#,900#, 1500# & 2500 #.
| Size | 1-5 inch, 0-1 inch |
| Rated Pressure (Bar) | 1.6 |
| Brand | All |
| Material Standard | ASTM A351, ASTM A182, ASTM A105, ANSI B16.5 |
The ANSI B 300 Class Threaded Flanges offered by us conforms to the ASME B1. 20.1 NTP threads. Designed as per the industry established parameters, these are fabricated using high grade raw material. These flanges are counter-bored and are chamfered to the counter bore at an angle of 450 (approx). Our range of threaded flanges finds application in numerous industries and is known for optimum performance and durability.
Stainless Steel: ASTM A 182, A 240
Grade : F304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L,
Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750
Carbon Steel : ASTM A 105, ASTM A 181
Alloy Steel : ASTM A 182, GR F1, F11, F22, F5, F9, F91
Nickel Alloys : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276
Copper Alloys : Copper, Brass & Gunmetal
Size : 1/8" NB TO 48"NB.
Class : 150#, 300#,400 #,600#,900#, 1500# & 2500 #.
| Thread Size | 1 MM |
| Size | 1/2 inch, 3/4 inch, 1 inch |
| Application | Structure Pipe, Chemical Fertilizer Pipe |
| Brand | ALL |
*Your information is safe with us.
| Thread Size | 1 MM |
| Size | 1/2 inch, 2 inch |
| Application | Hydraulic Pipe, Structure Pipe |
| Brand | ALL |
| Rated Pressure (Bar) | 1.6 |
| Size | 0-1 inch, 5-10 inch, 1-5 inch |
| Material Standard | ASTM A105, ASTM A182, ANSI B16.5, ASTM A351 |
| Brand | All |
We offer an extensive range of DIN Flanges -2502, used to close the ends of pipes, valves, pressure vessel openings and other channels; especially where one end needs to be blanked off. These flanges are available in both standard and customized designs, shapes and sizes. Stringent tests are performed throughout the production process, to ensure that we deliver only a high quality range of flanges to our clients.
| Size | 5-10 inch, 1-5 inch, 0-1 inch |
| Rated Pressure (Bar) | 1.5 |
| Material Standard | ANSI B16.5, ASTM A105 |
| Brand | ALL |
*Your information is safe with us.
| Size | 0-1 inch, 1-5 inch |
| Rated Pressure (Bar) | 1.6 MPA |
| Material Standard | ASTM A105, ASTM A182, ASTM A351, ANSI B16.5 |
| Brand | ALL |
| Size | 5-10 inch, 10-20 inch, 1-5 inch, 0-1 inch |
| Rated Pressure (Bar) | 1.5 |
| Material Standard | ASTM A105, ANSI B16.5 |
| Brand | ALL |
| Size | 0-1 inch |
| Material Standard | ASTM A105 |
| Brand | Jindal |
We provide Reducing Flanges that are fabricated using quality stainless steel. These reducing flanges are available in different configuration to meet the requirement of varied industry applications. Our stainless steel reducing flanges range is mainly used to connect tubings and pipe sections. These Reducing Flanges are appreciated for close tolerances, reliability and durability and also customized as per the requirement of clients.
Features: Stainless Steel Reducing Flanges
Durability
Chemical Resistance
Corrosion Resistance
Dimensional Accuracy
Thermal Resistance
Optimum Strength
Fine Finish
*Your information is safe with us.
| Rated Pressure (Bar) | 1.6 |
| Material Standard | ASTM A351, ASTM A105, ASTM A182, ANSI B16.5 |
We are manufacturing all type flanges :
forge steel flange / carbon steel flange /stainless steel flange / copper flange / brass flange
| Size | 0-1 inch |
| Material Standard | ASTM A105 |
| Brand | Jindal |
*Your information is safe with us.